CXWG造纸成型网剑杆织机

CXWG造纸成形网剑杆织机，主要用于织造造纸用聚酯单层、多层成型网。

CXWG Papermaking Forming Mesh Rapier Loom

Product Introduction

CXWG papermaking forming mesh rapier loom, mainly used for weaving papermaking polyester single-layer, multi-layer forming net.

Main Technical Parameters

1. 聚酯单丝适用范围：0.1-0.8mm。

1. Polyester monofilament scope: 0.1-0.8mm.

2.纬密范围：100-1200纬/10cm。

2. Weft density range: 100-1200 weft/10cm.

3.穿筘幅宽：11000mm-15800mm。

3. Reed width: 11000mm-15800mm.

4.经济转速：60转/分钟。

4. Economic speed: 60 r/min minutes.

5.整机总功率：20KW-40KW。

5. The total power: 200KW.

Main Structure

1. 机  架：主墙板采用铸铁箱式结构，整机安装在整体底座上。

1. Frame: The main wall panel is made of cast iron material, and the whole machine is installed on the overall base.

2.主 传 动：双侧伺服电机直联行星减速机同轴传动。

2. Main drive: The bilateral servo motors are directly connected to the planetary reducer for coaxial transmission.

3.开口机构：双侧下置复动式高速多臂机，20片综框。

3. Opening mechanism: Bilateral bottom-mounted reciprocating high-speed dobby machine, 20 pieces of heald frame.

4.引纬机构：进口伺服电机双剑杆引纬，8色选纬。

4. Weft insertion mechanism: Imported servo motor double rapier weft insertion, eight-color weft selection.

5.打纬机构：多段分体组合式曲轴四连杆打纬。

5. Beating-up mechanism: Multi-section modular combined crankshaft and four-link mechanism for wefting.

6.卷取机构：伺服驱动三辊积极卷取。

6. Coiling mechanism: servo-driven three-roller positive curling.

1. 送经机构：伺服驱动双经轴积极送经。

7. Send-off mechanism: servo-driven double-beam active send-off.

8.卷网机构：伺服电机驱动的机外表面卷网。

8. Roll net mechanism: An external surface net rolled by a servo motor drive.

9.润滑系统：整机采用集中润滑和手动润滑相结合。

9. Lubrication system:The entire machine adopts a combination of centralized lubrication and manual lubrication.

10.控制系统：整机采用PLC可编程自动控制系统，可自由设定织机各种参数，故障自停、自动显示。

10. Control system: The whole machine adopts PLC programmable automatic control system, which can freely set various parameters of the loom, and the fault stops and automatically displays.